Design and Construction Water Tank Overflow Indicator
Student: Mubarak Olawale Oriolowo (Project, 2025)
Department of Computer Engineering
Lens Polytechnic, offa, Kwara State.
Abstract
ABSTRACTThis project is titled the design and construction of a water level sensor system. It is designed to indicate the level of water to over-head tank. It not only indicates the amount of water present in the overhead tank but also gives an alarm when the tank is full.When the water is empty the wires in the tank are open circuited and the 180K resistors pulls the switch low hence opening the switch and LEDs are OFF. As the water starts filling up, first the wire in the tank connected to S1 and the + supply are shorted by water. This closes the switch S1 and turns the LED1 ON. As the water continues to fill the tank, the LEDs2 , 3 and 4 light up gradually.When the water is full, the base of the transistor BC148 is pulled high by the water and this saturates the transistor, turning the buzzer ON. The SPST switch has to be opened to turn the buzzer OFF.
Keywords
For the full publication, please contact the author directly at: mubarakoriolowo@gmail.com
Filters
Institutions
- AVE-MARIA UNIVERSITY, PIYANKO, NASARAWA STATE 1
- Babcock University, Ilishan-Remo, Ogun State 7
- Bamidele Olumilua University of Edu. Science and Tech. Ikere Ekiti, Ekiti State 454
- Bauchi State College of Agriculture, Bauchi, Bauchi State 1
- Bauchi State University, Gadau, Bauchi State 16
- Bayelsa State Polytechnic, Aleibiri, Bayelsa State 13
- Bayero University, Kano, Kano State 586
- Benue State Polytechnic, Ugbokolo, Benue State 10
- Benue State University, Makurdi, Benue State 47
- Bingham University, Karu, Nasarawa State 3