Modification and Simulation of the Ge F404 Turbine Blade Internal Cooling Techniques
Student: Sophia Onyekachukwu Esimike (Thesis, 2025)
Department of Mechanical Engineering
University of Benin, Benin City, Edo State
Abstract
ABSTRACT This project analyzed and explored better internal cooling techniques for a gas turbine blade. The base conventional design (GE F404) was modified into two separate cooling configuration; the 45° angled ribs and wavy ribs. Conjugate Heat Transfer(CHT) Simulation were performed on all three models, and the result of the two modified model were compared to that of the base model for improvement. The 45° ribs and the wavy ribs both displayed significant improvement in heat transfer performance. This finding suggests that both the 45° rib and wavy rib offer promising avenue for cooling gas turbine blades.
Keywords
For the full publication, please contact the author directly at: sophia.esimike@eng.uniben.edu
Filters
Institutions
- Al-Hikmah University, Ilorin, Kwara State 2
- AL-ISTIQAMAH UNIVERSITY, SUMAILA, KANO STATE 1
- Al-Qalam University, Katsina, Katsina State 5
- Alex Ekwueme Federal University, Ndufu-Alike, Ebonyi State 87
- Alvan Ikoku College of Education, Imo State, (Affl To Univ of Nigera, Nsukka) 11
- Ambrose Alli University, Ekpoma, Edo State 478
- Anambra State College of Health Technology, Obosi, Anambra State 1
- Auchi Polytechnic, Auchi, Edo State 503
- Auchi Polytechnic, Auchi, Edo State. (affl To Nnamdi Azikiwe University, Awka) 3
- Audu Bako College of Agriculture Danbatta, Kano, Kano State 54