Design and Construction of Iot Based Electricalenergy Meter Using Gsm Module
Student: Tosin Ayobami Olusegun (Project, 2025)
Department of Physics Electronics
Federal Polytechnic, Ede, Osun State
Abstract
ABSTRACT
The design and construction of IOT based electrical energy meter using GSM MODULE” aimed to construct an IOT based electrical energy meter using a GSM module for remote monitoring and management of energy consumption. The gadget sensed the Alternating Current (AC) voltage using ZMPT101B, ACS 712 for current sensor where a C-like language was written on the Arduino IDE and burned to the Arduino Uno Microcontroller which was used as the brain box of the work. The microcontroller processed the current and voltage to ON the load relay if there was credit unit loaded. A 100W bulb was used for test running and 10W AKT energy saving bulb was latter used. Then the GPRS mode of the SIM on the gsm module was enabled to send the data obtained to the free thingspeak IOT platform on the internet. The data
showed the current(A), voltage (V), power(kW), energy (kWh) and the energy balance (kWh).
Keywords
For the full publication, please contact the author directly at: oluseguntosinayobami1@gmail.com
Filters
Institutions
- UMA UKPAI SCHOOL OF THEOLOGY, UYO, AKWA IBOM STATE (AFFL TO UNIVERSITY OF UYO) 1
- Umaru Ali Shinkafi Polytechnic, Sokoto, Sokoto State 24
- Umaru Musa Yaradua University, Katsina, Katsina State 28
- Umca, Ilorin (Affiliated To University of Ibadan), Kwara State 1
- University of Abuja, Abuja, Fct 117
- University of Africa, Toru-Orua, Bayelsa State 4
- University of Benin, Benin City, Edo State 362
- University of Calabar Teaching Hospital School of Health Information Mgt. 1
- University of Calabar, Calabar, Cross River State 240
- University of Ibadan, Ibadan, Oyo State 14