Design, Construction and Performance Evaluation of Cassava Peeling Machine
Student: IUSA JACOB KPAMOR (Project, 2025)
Department of Mechanical Engineering
Joseph Sarwuan Tarka University, Makurdi, Benue State
Abstract
ABSTRACT
This project presents the design and development of cassava peeling machine, aimed at enhancing efficiency, reducing labor requirements, and improving product quality. The machine components were locally available material and the machine uses abrasive peeling mechanism to remove cassava skin. The machine comprises of an abrasive cylindrical drum, abrasive rotating disc, electric motor, shaft, bearing, belt and pulley. Performance of the machine was evaluated based on five trials with 2000g of cassava tubers each. The cassava tubers with maximum length and diameter of 7.5 and 3.5 inches respectively must be cylindrical and without dimples. The disc rotates at 497rpm with an electric motor of 1hp and 1400rpm. The average peeling efficiency was 67% with minimal flesh loss.
Keywords
For the full publication, please contact the author directly at: iusajacob101@gmail.com
Filters
Institutions
- University of Ilorin, Kwara State 400
- University of Jos, Jos, Plateau State 19
- University of Lagos 18
- University of Maiduguri ( - Elearning), Maiduguri, Borno State 3
- University of Maiduguri, Borno State 109
- University of Nigeria, Nsukka, Enugu State 269
- University of Port Harcourt Teaching Hospital, Port Harcourt , River State 5
- University of Port-Harcourt, Rivers State 174
- University of Uyo, Akwa Ibom State 206
- Usmanu Danfodio University, Sokoto, Sokoto State 245