Influence of Filler Types on Stiffness of Asphalt Mixture
Student: Gospel Emmanuel Okon (Project, 2025)
Department of Civil Engineering
Akwa Ibom State University, Ikot-Akpaden, Akwa Ibom State
Abstract
Asphalt concrete which consists of coarse aggregate, fine aggregate, filler, and asphalt cement (used as a binder) mixed together in proportion according to a specification is an important composite material for road construction. In this study, the effect of using limestone dust as filler when compared to granite dust was investigated. Sixteen (16) specimens of asphalt mixtures made with limestone and granite filler (control) were produced, and the optimum bitumen content (O.B.C) based on 5.0%, 5.5%, 6.0% and 6.5% bitumen content was determined. Afterward mechanical properties such as Marshall stability, flow, and stiffness was determined. The results show that 6.0% was the optimum bitumen content (O.B.C) for the control and limestone filler. Moreover, the Marshall stability of limestone was 3.87KN higher than that of the control, while the flow and stiffness was 1.83mm and 2.37KN/mm for the limestone and granite dust. In conclusion, mix with limestone dust performs better than mix with granite dust in terms of stability.
Keywords
For the full publication, please contact the author directly at: gospelmichael280@gmail.com
Filters
Institutions
- Landmark University, Omu-Aran, Kwara State 1
- Lead City University, Ibadan, Oyo State 1
- Lens Polytechnic, offa, Kwara State. 214
- Madonna University, Elele, Rivers State 20
- Madonna University, Okija, Anambra State 2
- Mcpherson University, Seriki Sotayo, Ogun State 1
- Michael and Cecilia Ibru University, Owhrode, Delta State 1
- Michael Okpara University of Agriculture, Umudike 43
- Michael Otedola Col of Primary Educ. Epe, Lagos (affl To University of Ibadan) 8
- Modibbo Adama University, Yola, Adamawa State 15