Production and Characterization of Alumina Zircon Refractory: Using a Clay Binder
Student: Rachael Tiam (Project, 2025)
Department of Glass Technology
Ahmadu Bello University, Zaria, Kaduna State
Abstract
This study investigates the production and characterization of alumina-zircon refractory composites using a clay binder, focusing on the effects of clay content on micro-structure, mechanical, and thermal properties. Alumina (Al2O3) and zircon (ZrO2) powders were mixed with varying amounts of clay binder (5-15 wt%) and sintered at 1400°C. The physical and mechanical properties of the composites were evaluated using Porosity and mechanical strength testing. Samples 2 and 3 which had 10 & 12% Clay content showed the highest MOR and Porosity scores. While the samples with 5 and 15% clay content showed less Porosity and MOR. This goes to show the importance of optimal binder percentage.
Keywords
For the full publication, please contact the author directly at: tiamrachael@gmail.com
Filters
Institutions
- Federal University of Technology, Minna, Niger State 47
- Federal University of Technology, Owerri, Imo State 95
- Federal University Oye-Ekiti, Ekiti State 41
- Federal University, Birnin-Kebbi, Kebbi State 37
- Federal University, Dutse, Jigawa State 6
- Federal University, Dutsin-Ma, Katsina State 63
- Federal University, Gashua, Yobe State 3
- Federal University, Gusau, Zamfara State 14
- Federal University, Kashere, Gombe State 1
- Federal University, Lafia, Nasarawa State 6