Production and Characterization of Alumina Zircon Refractory: Using a Clay Binder
Student: Rachael Tiam (Project, 2025)
Department of Glass Technology
Ahmadu Bello University, Zaria, Kaduna State
Abstract
This study investigates the production and characterization of alumina-zircon refractory composites using a clay binder, focusing on the effects of clay content on micro-structure, mechanical, and thermal properties. Alumina (Al2O3) and zircon (ZrO2) powders were mixed with varying amounts of clay binder (5-15 wt%) and sintered at 1400°C. The physical and mechanical properties of the composites were evaluated using Porosity and mechanical strength testing. Samples 2 and 3 which had 10 & 12% Clay content showed the highest MOR and Porosity scores. While the samples with 5 and 15% clay content showed less Porosity and MOR. This goes to show the importance of optimal binder percentage.
Keywords
For the full publication, please contact the author directly at: tiamrachael@gmail.com
Filters
Institutions
- University of Ilorin, Kwara State 398
- University of Jos, Jos, Plateau State 19
- University of Lagos 18
- University of Maiduguri ( - Elearning), Maiduguri, Borno State 3
- University of Maiduguri, Borno State 109
- University of Nigeria, Nsukka, Enugu State 268
- University of Port Harcourt Teaching Hospital, Port Harcourt , River State 5
- University of Port-Harcourt, Rivers State 173
- University of Uyo, Akwa Ibom State 206
- Usmanu Danfodio University, Sokoto, Sokoto State 245