Design and Optimization of a Shell and Tube Heat Exchanger
Student: Emmanuel Okokon Asuquo (Project, 2025)
Department of Mechanical Engineering
Cross Rivers University of Technology, Calabar, Cross Rivers State
Abstract
This project presents an attempt to optimize a shell and tube heat exchanger using the Particle Swarm Optimization (PSO) on the MathLab software. A heat exchanger is a system that is used to transfer heat through two (2) flowing fluids that are of different temperatures. There are different types of heat exchangers used in various industries like the finned tube heat exchanger/ air cooled heat exchanger, shell and tube heat exchanger, plate heat exchanger etc. The shell and tube heat exchanger is probably the most versatile and widely used in most industrial sectors. This project captures the optimization of the total annual operating cost. Thus, an attempt has been made to obtain a set of optimum dimensions of the heat exchanger subject to a given set of inlet and desired outlet conditions. All parameters have been taken from the relevant industry codes and standards, thus making the optimization problem akin to a real-world scenario.
Keywords
For the full publication, please contact the author directly at: emmanuelasuquo512@gmail.com
Filters
Institutions
- Al-Hikmah University, Ilorin, Kwara State 2
- AL-ISTIQAMAH UNIVERSITY, SUMAILA, KANO STATE 1
- Al-Qalam University, Katsina, Katsina State 5
- Alex Ekwueme Federal University, Ndufu-Alike, Ebonyi State 87
- Alvan Ikoku College of Education, Imo State, (Affl To Univ of Nigera, Nsukka) 11
- Ambrose Alli University, Ekpoma, Edo State 478
- Anambra State College of Health Technology, Obosi, Anambra State 1
- Auchi Polytechnic, Auchi, Edo State 503
- Auchi Polytechnic, Auchi, Edo State. (affl To Nnamdi Azikiwe University, Awka) 3
- Audu Bako College of Agriculture Danbatta, Kano, Kano State 54