Design and Optimization of a Shell and Tube Heat Exchanger
Student: Emmanuel Okokon Asuquo (Project, 2025)
Department of Mechanical Engineering
Cross Rivers University of Technology, Calabar, Cross Rivers State
Abstract
This project presents an attempt to optimize a shell and tube heat exchanger using the Particle Swarm Optimization (PSO) on the MathLab software. A heat exchanger is a system that is used to transfer heat through two (2) flowing fluids that are of different temperatures. There are different types of heat exchangers used in various industries like the finned tube heat exchanger/ air cooled heat exchanger, shell and tube heat exchanger, plate heat exchanger etc. The shell and tube heat exchanger is probably the most versatile and widely used in most industrial sectors. This project captures the optimization of the total annual operating cost. Thus, an attempt has been made to obtain a set of optimum dimensions of the heat exchanger subject to a given set of inlet and desired outlet conditions. All parameters have been taken from the relevant industry codes and standards, thus making the optimization problem akin to a real-world scenario.
Keywords
For the full publication, please contact the author directly at: emmanuelasuquo512@gmail.com
Filters
Institutions
- Covenant Polytechnic, Aba, Abia State 1
- Covenant University, Canaan Land, Ota, Ogun State 4
- Crawford University of Apostolic Faith Mission Faith City, Igbesa, Ogun State 2
- Crescent University, Abeokuta, Ogun State 1
- Cross Rivers University of Technology, Calabar, Cross Rivers State 142
- Delta State Polytechnic, Ogwashi-Uku, Delta State 11
- Delta State Polytechnic, Otefe, Delta State 13
- Delta State University, Abraka, Delta State 139
- Ebonyi State University, Abakaliki, Ebonyi State 17
- Edo University, Iyamho, Edo State 10