Construction , Design and Control of a Three Phase Induction Motor
Student: JOSHUA UDOKA IKEANYIONWU (Project, 2025)
Department of Electrical Engineering
University of Nigeria, Nsukka, Enugu State
Abstract
This paper deals with the design & analysis of the performance of redesigned three phase induction motor. This paper shows the practical step by step guidelines to recalculate the winding parameters to match a given stator core of a squirrel cage motor and the procedures to be taken when testing an induction motor. Using the set step by step methods in this work. The redesigned induction motor operation was stable and gave a near liner performance. This project was able to achieve a functional 3 phase 24 slot 4 pole single layer distributed winding or a relatively small stator core originally form a single phase induction motor. The project also gives some detailed explanation on the other winding types that can be used and some electronic components that can be used to control such motors.
Keywords
For the full publication, please contact the author directly at: joshuaudokaike@gmail.com
Filters
Institutions
- Federal University of Technology, Minna, Niger State 47
- Federal University of Technology, Owerri, Imo State 95
- Federal University Oye-Ekiti, Ekiti State 41
- Federal University, Birnin-Kebbi, Kebbi State 37
- Federal University, Dutse, Jigawa State 6
- Federal University, Dutsin-Ma, Katsina State 63
- Federal University, Gashua, Yobe State 3
- Federal University, Gusau, Zamfara State 14
- Federal University, Kashere, Gombe State 1
- Federal University, Lafia, Nasarawa State 6