Construction , Design and Control of a Three Phase Induction Motor
Student: JOSHUA UDOKA IKEANYIONWU (Project, 2025)
Department of Electrical Engineering
University of Nigeria, Nsukka, Enugu State
Abstract
This paper deals with the design & analysis of the performance of redesigned three phase induction motor. This paper shows the practical step by step guidelines to recalculate the winding parameters to match a given stator core of a squirrel cage motor and the procedures to be taken when testing an induction motor. Using the set step by step methods in this work. The redesigned induction motor operation was stable and gave a near liner performance. This project was able to achieve a functional 3 phase 24 slot 4 pole single layer distributed winding or a relatively small stator core originally form a single phase induction motor. The project also gives some detailed explanation on the other winding types that can be used and some electronic components that can be used to control such motors.
Keywords
For the full publication, please contact the author directly at: joshuaudokaike@gmail.com
Filters
Institutions
- UMA UKPAI SCHOOL OF THEOLOGY, UYO, AKWA IBOM STATE (AFFL TO UNIVERSITY OF UYO) 1
- Umaru Ali Shinkafi Polytechnic, Sokoto, Sokoto State 24
- Umaru Musa Yaradua University, Katsina, Katsina State 28
- Umca, Ilorin (Affiliated To University of Ibadan), Kwara State 1
- University of Abuja, Abuja, Fct 117
- University of Africa, Toru-Orua, Bayelsa State 4
- University of Benin, Benin City, Edo State 362
- University of Calabar Teaching Hospital School of Health Information Mgt. 1
- University of Calabar, Calabar, Cross River State 240
- University of Ibadan, Ibadan, Oyo State 14