Design, Fabrication and Performance Evaluation of a Crude Oil Centrifuge Machine
Student: Oshiokhai Blaise Mohammed (Project, 2025)
Department of Chemical Engineering
Federal University of Petroleum Resources, Effurun, Delta State
Abstract
This is a report on the design, fabrication and performance evaluation of a crude oil centrifuge. This project shows how a crude oil centrifuge was made locally from local materials. The design of this project showcases a plastic rotor which would be connected directly to a motor which is supported by a stand. The machine is housed in a 40×50×30 cm wooden box. The machine includes a plastic spinning wheel molded from waste plastic using a clay mold, a stand, a 12V DC motor, a wooden container for storage of the machine and some electrical wiring.
Keywords
For the full publication, please contact the author directly at: mohommedblaise@yahoo.com
Filters
Institutions
- Federal Polytechnic, Mubi, Adamawa State 20
- Federal Polytechnic, Nasarawa, Nasarawa State 59
- Federal Polytechnic, Nekede, Imo State 53
- Federal Polytechnic, offa, Kwara State 18
- Federal Polytechnic, Oko, Anambra State 8
- Federal School of Biomedical Engineering, (LUTH), Idi-Araba, Lagos State 1
- Federal School of Surveying, Oyo, Oyo State 7
- Federal University of Agriculture, Abeokuta, Ogun State 19
- Federal University of Petroleum Resources, Effurun, Delta State 77
- Federal University of Technology Akure, Ondo State 23