Design, Fabrication and Performance Evaluation of a Crude Oil Centrifuge Machine
Student: Oshiokhai Blaise Mohammed (Project, 2025)
Department of Chemical Engineering
Federal University of Petroleum Resources, Effurun, Delta State
Abstract
This is a report on the design, fabrication and performance evaluation of a crude oil centrifuge. This project shows how a crude oil centrifuge was made locally from local materials. The design of this project showcases a plastic rotor which would be connected directly to a motor which is supported by a stand. The machine is housed in a 40×50×30 cm wooden box. The machine includes a plastic spinning wheel molded from waste plastic using a clay mold, a stand, a 12V DC motor, a wooden container for storage of the machine and some electrical wiring.
Keywords
For the full publication, please contact the author directly at: mohommedblaise@yahoo.com
Filters
Institutions
- University of Ilorin, Kwara State 399
- University of Jos, Jos, Plateau State 19
- University of Lagos 18
- University of Maiduguri ( - Elearning), Maiduguri, Borno State 3
- University of Maiduguri, Borno State 109
- University of Nigeria, Nsukka, Enugu State 269
- University of Port Harcourt Teaching Hospital, Port Harcourt , River State 5
- University of Port-Harcourt, Rivers State 174
- University of Uyo, Akwa Ibom State 206
- Usmanu Danfodio University, Sokoto, Sokoto State 245