Design, Fabrication and Performance Evaluation of a Crude Oil Centrifuge Machine
Student: Oshiokhai Blaise Mohammed (Project, 2025)
Department of Chemical Engineering
Federal University of Petroleum Resources, Effurun, Delta State
Abstract
This is a report on the design, fabrication and performance evaluation of a crude oil centrifuge. This project shows how a crude oil centrifuge was made locally from local materials. The design of this project showcases a plastic rotor which would be connected directly to a motor which is supported by a stand. The machine is housed in a 40×50×30 cm wooden box. The machine includes a plastic spinning wheel molded from waste plastic using a clay mold, a stand, a 12V DC motor, a wooden container for storage of the machine and some electrical wiring.
Keywords
For the full publication, please contact the author directly at: mohommedblaise@yahoo.com
Filters
Institutions
- Covenant Polytechnic, Aba, Abia State 1
- Covenant University, Canaan Land, Ota, Ogun State 4
- Crawford University of Apostolic Faith Mission Faith City, Igbesa, Ogun State 2
- Crescent University, Abeokuta, Ogun State 1
- Cross Rivers University of Technology, Calabar, Cross Rivers State 142
- Delta State Polytechnic, Ogwashi-Uku, Delta State 11
- Delta State Polytechnic, Otefe, Delta State 12
- Delta State University, Abraka, Delta State 139
- Ebonyi State University, Abakaliki, Ebonyi State 17
- Edo University, Iyamho, Edo State 10